This release - corrects a regression introduced in 9.2.3 that prevents the user-defined sequence command from working correctly (tnx to Jerry K1JOS) - when controlling an Icom transceiver other than an IC-7800 that reports Split has been enabled, only selects the secondary VFO if "Dual Watch" is present and enabled; otherwise, the primary VFO is selected (tnx to Wolf DK1FW) - when controlling an Icom transceiver that employs VFO selection commands, correctly updates Commander's VFO display when Split is enabled and VFO B is selected (tnx to Wolf DK1FW) - while processing an external directive that requires access to the "other" VFO, suspends the processing of external directives until the current directive has completely executed (tnx to Bill G4WJS) - corrects the CmdSetRXFreq and CmdSetTXFreq TCP directives to work correctly when Split is enabled (tnx to Bill G4WJS) - supports a new CmdSyncIcom TCP directive (tnx to Bill G4WJS) - when directed to set an FT-450's TX VFO frequency, sets its TX VFO mode to that of the RX VFO (tnx to John W5UP and Dan KC2STA) Commander 10.7.5 is available via the DXLab Launcher and via 73, Dave, AA6YQ