This release 

- correctly specifies callsign text and background colors for display on Flex SmartSDR panadaptor (tnx to Rick WR0H)

- prevents an errorlog.txt entry from being generated by SpectrumModule.DisplaySpectrumData state 36

- after a band change with the Spectrum Display in Centered mode, updates the Spectrum Display's  Reference Level with reference to the correct frequency (tnx to Mike K4PRO and Björn SM7IUN)

- when switching the primary transceiver from a Yaesu FT-736 to another radio, doesn't terminate Commander (tnx to Jim N8SIM)

- when switching the primary transceiver from a Yaesu FT-736 to another radio, waits 50 ms after sending the "stop CAT" command to the FT-736 before closing the primary CAT port (tnx to Jim N8SIM)

- when controlling an Icom transceiver with Spectrum capabilities, doesn't expect an ACK/NAK response from the "set reference level" or "set tracking mode" commands, because they may not be sent if "CI-V transceive" is enabled (tnx to Mike K4PRO and Björn SM7IUN)

- when controlling a Flex Signature radio, ensures that the S-meter is displayed above the Main window's VFO (tnx to Keith - AC9S)

- enables the Secondary CAT port to follow the uplink or downlink frequency when connected to SatPC32 (tnx to Joe W4WT)

- enables the Secondary CAT port to follow the uplink or downlink mode when connected to SatPC32 (tnx to Joe W4WT)

- updates the Configuration.htm documentation file


Notes

1. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe" 


2. If this upgrade doesn't work correctly, see the "After an Upgrade" section of  
<http://www.dxlabsuite.com/dxlabwiki/ApplicationStoppedWorking>


3. After upgrading, to revert to the previous version of Commander, see  
<http://www.dxlabsuite.com/dxlabwiki/RevertApplicationVersion>



Commander 14.5.3 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ