This release - corrects a regression that prevents the secondary transceiver from leading or following the frequency and mode of a primary transceiver that is an Icom supporting Data modes (tnx to Joe K2XX) - automatically determines whether an Icom 7800 is running firmware version 2.3.0 or later, thereby eliminating the "Transceiver firmware can report split" checkbox (tnx to Laurie VK3AMA and Ken K4XL) - when the primary transceiver is an Icom 7800 running firmware revision 2.3.0 or later, *** can transmit the full complement of CW characters and pro-signs described in *** with WinWarbler configured for "CW via Xcvr Ctrl SW", displays the 7800's CW keyer speed on WinWarbler's Main window, and allows you to control the 7800's CW speed from WinWarbler - when the primary transceiver is an Icom 7800, no longer selects the 7800's Subreceiver when Split is enabled (tnx to Bob W6OPO) - reduces the minimum Command Interval to 10 ms - updates the Configuration.htm documentation file Commander 8.8.8 is available via the DXLab Launcher and via 73, Dave, AA6YQ