This release - with the Primary transceiver set to Electraft K3 or KX3, properly responds to an IS; or BW; command received from the Secondary CAT port (tnx to Randy KS4L and Joe W4TV) - prevents an errorlog.txt entry from being generated when Commander is directed to QSY to a frequency above 2,147,483,647 hz while controlling an Icom transceiver - when directed by another application to change transceivers, immediately acknowledge the request rather than waiting for transceiver selection to complete, which can take so long that the client gives up - when the Primary transceiver is an Elecraft K3 or KX3 and the Secondary CAT port protocol is set to Elecraft, properly reports the Primary transceiver being in "Data A" sub-mode to the Secondary CAT port (tnx to Joe W4TV) - properly reports the state of an Icom 756 Pro III transceiver's Data Mode (tnx to Stephen K0SD) - provides a user-defined command that selects a primary transceiver (tnx to Gregg W6IZT and Iain N6ML) - responds to depressing the CTRL key while clicking the up/down arrow buttons to the left of the Main window's VFO by QSYing up or down one amateur band, independently of whether the current band's width exceeds 1 megahertz (tnx to Joe W4TV) - on a PC with internet access, responds to depressing the CTRL key while clicking the Main window's Help button by displaying "Getting Started with Transceiver Control" - provides a "Read radio's EEPROM to determine VFO and Split status" option that when enabled tracks an Yaesu FT-817, FT-857, FT-857D FT-897 transceiver's Split and VFO Selection by reading locations from the radio's EEPROM (tnx to Pat F6GCP and Iain N6ML) - when an FT-817, FT-857, FT-857D, or FT-897 is selected or first started with the "Read radio's EEPROM to determine VFO and Split status" option enabled, disables the AxB, A=B, XFC, and Split buttons until Commander has obtained the values of both VFOs from the radio (tnx to Pat F6GCP and Iain N6ML) - when an FT-817, FT-857, FT-857D, or FT-897 is selected or first started with the "Read radio's EEPROM to determine VFO and Split status" option enabled and the AxB or A=B function is activated, disable the AxB, A=B, XFC, and Split buttons until the function is complete (tnx to Pat F6GCP and Iain N6ML) - when the primary transceiver is a K3 or KX3, and the Secondary CAT port's Protocol selector is set to Elecraft, includes the primary transceiver's last reported data submode in the response to an IF; command received from the secondary CAT port (tnx to Joe W4TV) - when the primary transceiver is a K3 or KX3, the Secondary CAT port's Protocol selector is set to Elecraft, and a DT; command is received from the primary CAT port, responds by sending a DTn; command to the Secondary CAT port where n is the K3 or KX3's last reported data submode (tnx to Joe W4TV) - when the primary transceiver is a K3 or KX3, the Secondary CAT port's Protocol selector is set to Elecraft, the Secondary CAT port is set to "Lead primary" or "Follow & lead primary", and a DTn; command is received, send that DTn; command to the primary transceiver (tnx to Joe W4TV) - updates the ChangingFrequency.htm, CommandSequences.htm, and Configuration.htm documentation files Commander 9.8.8 is available via the DXLab Launcher and via 73, Dave, AA6YQ