This release - when controlling an Elecraft K3 or KX3, properly manages the DataL and DataU settings (tnx to Jim K1IR) - when controlling an Icom transceiver capable of reading the state of "Dual Receive", decides whether this capability is supported by the current firmware after the radio responds with a frequency (tnx to Jim K7EG) - when controlling a Flex Signature 6000-series radio, permits a memory to be saved with its mode set to DIGU - displays the Configuration window's Bandspread tab when the Bandspread window's Config button is clicked - interacts with Flex Signature 6000-series radios through their Ethernet API (tnx to Eric KE5DTO, Tim W4TME, Ed KG5FBT, Steve N5AC, Steve K5FR, Richard LB2EG, Jim NM1W, Jon KF2E, Roger W9YU, Randy AJ7B, David G7HJX, Bill K3WA, Hunter K3IE, George W2GS, Bill W9OL, and Bob K5KDN) - provides a substitution string format for decimal numbers without leading zeros, as is required in Flex Signature Ethernet commands - provides a user-defined command sequence substitution for a Flex Signature radio's VFO A panadaptor stream ID - makes the Messages window horizontally resizable - supports Filter Groups for the Elecraft K3 and KX3, with the option to restore Filter Group selection on mode changes (tnx to Joe W4TV and Jim K1IR) - provides Yaesu FT-450 transmit meter selection and reporting (tnx to Dan KC2STA) - updates the CommandSequences.htm, Configuration.htm, and MonitoringMessages.htm documentation files Note: 1. Instructions for using Commander and WinWarbler with a Flex 6300, 6500, or 6700 is available via 2. Instructions for using Commander and WSJT-X with a Flex 6300, 6500, or 6700 is available via 3. The responses by FlexRadio personnel to my questions were notably prompt and accurate. 4. I received a ton of help with this version; many thanks to all who contributed! Commander 11.8.0 is available via the DXLab Launcher and via 73, Dave, AA6YQ