This release - when the primary transceiver is following the secondary CAT port, detects and corrects any frequency discrepancy that persists for more than 200 ms (tnx to Gene K7TXO) - when controlling a Flex Signature radio, permanently disables the "monitor connection" option - when controlling a Flex Signature radio, logs any Commander-initiated closure of the TCP port even if "log debugging info" is not enabled - when controlling a Flex Signature radio, prevents creation of an errorlog.txt entry when an invalid Spot Lifetime is specified on the Configuration window's Bandspread tab - adds settings for 2m, 70cm, 33cm, and 23cm to the Icom Spectrum Configuration window (tnx to Jeff KB2M and Björn SM7IUN) - on the Configuration window's MultiRadio tab, permits a radio's Enable box to be checked so long as its Radio Model is specified (tnx to Henry N4HB) - correctly tracks a TS-890's S-meter, and includes a S-meter file for this radio (tnx to John N1JM) - when an "opcode 7" command is received via the "Secondary CAT Port" from an Icom radio while the primary transceiver is an Icom, sends the command to the primary transceiver (tnx to Jeff KB2M) - accepts a command via TCP to direct the transceiver to transmit text as CW (tnx to Howard, K7JNX) - updates the ControllingMultipleRadios.htm documentation file Notes 1. The above changes have not eliminated all reported "TCP disconnects" between Commander and Flex Signature radios running SmartSDR version 3.0.27; the diagnostics indicate that such disconnects are not being initiated by Commander. My advice to Flex Signature radio users is still "remain with SmartSDR version 2.4.9 unless you have a compelling reason to upgrade" Many thanks to Dave G7HJX, Roger N3RC, Rick WR0H, Ronald W4RJF, Jamie WW3S, Chris N6WM, Mark W3II, Dave NX6D, Jeff KI0KB, Tim WA5YOM, John K3MA, and John K1ESE for their help in testing many new versions of Commander with Flex Signature radios. 2. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe" 3. If this upgrade doesn't work correctly, see the "After an Upgrade" section of 4. After upgrading, to revert to the previous version of Commander, see Commander 14.1.6 is available via the DXLab Launcher and via 73, Dave, AA6YQ