This release - doesn't move cursor focus to the VFO display when characters are entered in memory notes (tnx to John NA8M) - when directed by another application to QSY to a specific frequency and mode with an Icom transceiver, selects the primary VFO before setting the new mode (tnx to Rene DF9GR) - clears a memory if you depress the CTRL key while clicking that memory's Save button (tnx to Angelo IT9FCP) - interprets PageUp/PageDown keystrokes in the Bandspread window as QSY directives to enable the use of a Griffin Powermate (tnx to Rob AB7CF) - supports the Alinco DX77-T (tnx to Bud K9ZT and Jack AE7DX) - improves frequency tracking with a TenTec Orion (tnx to Mike K9UW) - when the A or B VFO selection buttons are clicked with an Elecraft K2 and split is enabled, re-enables split at the end of the operation to compensate for the K2 resetting it (tnx to Dennis WB0WAO) - can initialize and/or dial a modem before initiating frequency and mode interrogation (tnx to Peter NO2R) - adds DDE commands to control VFO selection, VFO A=B, VFO AxB, filter selection, split enable/disable, and dual receive enable/disable (tnx to Stan W4MQ) - makes the S-meter readout DDE-accessible (tnx to Stan W4MQ) - increases the number of commands in a user-defined sequence from 16 to 32 (tnx to Dennis WB0WAO) - adds the ability to save/load user-defined command sequences to/from files (tnx to Dennis WB0WAO, Wolf DK1IP, and John NA8M) - updates the ChangingFrequency.htm, Configuration.htm, CommandSequences.htm, UsingMemories.htm, and ExampleToggleCommand.jpg online documentation files Additional notes: - when using the DX77-T, a rapid click of the XFC button does not work correctly; I'm still working on this one... - this release includes untested support for the Yaesu FTDX-9000 - the new DDE commands are documented in DXLabTest 1.0.8 Commander 5.6.0 is available via http://www.qsl.net/dxlab/download.htm or via this reflector's Files area. 73, Dave, AA6YQ