This release

- prevents "CIVModule.PollPegasus:Input past end of file" errorlog.txt file entries

- handles large frequencies reported by the Yaesu Mark V (tnx to Joe W4TV)

- properly displays 23 cm band frequencies on the in the Main and Bandspread windows (tnx to Dave W5SV)

- clears the S-meter display when continuous frequency and mode interrogation is disabled

- uses FN rather than FR/FT commands for VFO selection and IF rather than MD to request the current mode when controlling a Kenwood TS-711, TS-811, TS-940, TS-440, R-5000, or TS-140 (tnx to Cliff K3LL)

- eliminates poor frequency tracking during auto-repeat or mousewheel operations (tnx to Bob N9RS and Ed K1GGI)

- doesn't disable Orion VFO B reporting if its S-meter reporting is disabled in the Radios.txt file (tnx to John K1ESE)

- when setting the transceiver frequency with continuous polling disabled, requests a frequency update rather than wait, request a frequency update, wait, and request a mode update

- allows the command interval to be specified whether continuous frequency and mode interrogation is enabled or disabled

- in a user-defined command sequence command that specifies ascii characters, replaces any <n> within the command with a single character whose ascii value is n; for example, <13> will insert the "carriage return" character (tnx to John K1ESE and Art W2NRA)

- if a Kenwood transceiver is selected but has not yet provided its model identifier, requests its model identifier when polling  (tnx to Cliff K3LL)

- updates the CommandSequences.htm and Configuration.htm online documentation files


Commander 6.9.9 is available via the DXLab Launcher and via http://www.dxlabsuite.com/download.htm .

    73,

        Dave, AA6YQ