This release 

- doesn't append spaces when generating CW for WinWarbler by sending a KY command to a K3 (tnx to Rich VE3KI and Mark W2OR)

- adds function key shortcuts:

F1: XFC

SHIFT-F1: select VFO A (or Main VFO)

SHIFT-F2: select VFO B (or Sub Sub VFO)

SHIFT-F3: A=B (or Main = Sub)

SHIFT-F4: AxB (or Main x Sub)

- when controlling a Yaesu FT-1000MP or Mark V, displays VFO B when in QMB or Mem or M Tune mode, and highlights the transceiver's mem/vfo mode by displaying displaying "(QMB)" or "(Memory)" or "(Memory Tune)" in the Main window's VFO A panel (tnx to Juergen DL8LE)

- when controlling a Yaesu FT9000, 2000, 950, and 450, highlights the transceiver's mem/vfo mode by displaying "(QMB)" or "(QMB-MT)" or "(Memory)" or "(Memory Tune)" in the Main window's VFO A (tnx to Juergen DL8LE and Joe W4TV)

- supports the Icom IC-7200 and IC-7600

- provides the option to specify font and background colors for frequencies displayed on the Main window (tnx to Ken K4XL)

- provides the option to specify font and background colors for frequency-dependent device settings displayed on the Main window (tnx to Juergen DL8LE)

- when controlling an IC-7600, IC-7700, or IC-7800, provides the ability to set the UTC date and time, and provides the option to automatically set the UTC date and time when Commander starts up or when the transceiver is selected (tnx to Cliff G4PZK and Mel VE2DC))

- updates the ChangingFrequency.htm, Configuration.htm, and UsingMemories.htm documentation files


Notes:

1. the Modem Command panel has moved to the botton of the Config window's Ports tab

2. Font and background colors for frequencies can be specified via the new "Frequency Colors" panel on the Config window's General tab. Commander will warn you if the font and background colors you choose may not have enough contrast enough for visibility.

3. Font and background colors for the readouts of frequency-dependent devices can be specified in the new "Setting Readout Colors" panel on each device's tab on the Config window. Commander will warn you if the font and background colors you choose may not have enough contrast enough for visibility. If desired, you can specify different colors for each device.

4. If you have an IC-7600, IC-7700, and IC-7800, clicking the new "Set Time" button in the Radio panel on the Config window's General tab will set your transceiver's UTC date and time to the current UTC date and time; checking the new "Set transceiver UTC time on startup or selection" option will do this automatically when Commander starts up or when the transceiver is selected.


Commander 7.6.1 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>


    73,

        Dave, AA6YQ