This release 

- corrects FT-747 status decoding (tnx to Gintaras LY1GP)

- provides the ability while transmitting to display RF Power output, SWR, ALC, Compression, Volts, or Amps for an initial set of Icom, Yaesu, and Kenwood transceivers (tnx to Ed K1GGI and Jay W5JAY)

- accepts a command to switch primary transceivers from other applications (tnx to Larry K2GN)

- updates the CommandSequences.htm, Configuration.htm, index.htm, and SMeter.htm documentation files

- adds the TXMeter.htm documentation file 


Notes:

1. Transmission meter capabilities supported in this release are depicted in the table in 

<http://www.dxlabsuite.com/commander/Help/TXMeter.htm>

Kenwood TS-2000 support is unverified; if you try it, please let me know how it goes.


2. To display a transmission meter, disable the "No interrogation while transmitting" option on the Configuration window's General tab, and select the meter to be displayed while transmitting via this tab's new "Xmit Meter" selector.


3. Transmission meter files are provided for the FT-1000MP, FT-1000 MP MarkV, IC-7700, and IC-7800, so the meter readings for these transceivers are calibrated in apppropriate units; for all other supported transceivers, meter readouts are displayed as a percentage between 0 and 100. Instructions for creating a TX meter file that displays calibrated readings can be found in 

<http://www.dxlabsuite.com/commander/Help/TXMeter.htm>.


3. If you create a calibrated meter file for your transceiver, please sent me a copy so I can include it in the next Commander release


Commander 9.4.6 is available via the DXLab Launcher and via 

<http://www.dxlabsuite.com/download.htm>

     73,

          Dave, AA6YQ