This release - doesn't send commands to the last selected parallel port if no parallel port is currently selected (tnx to James WW3S) - when switching from AFSK soundcard RTTY to FSK soundcard RTTY operation, sets the Net box to checked before disabling it (tnx to Bob WB2NVR) - when operating FSK soundcard RTTY operation, doesn't allow the transmit frequency to be set by right-clicking in the waterfall display (tnx to Bob WB2NVR) - doesn't clear the CW receive pane when restoring WinWarbler's Main window from being minimized (tnx to Angelo IT9FCP) - selecting a URL in a receive pane with the Alt key depressed directs the selected browser to navigate to that URL (tnx to Gil W0MN) - provides the option to specify a user-defined radio command sequence to be sent to Commander after any QSY directive is sent to Commander (tnx to Ron KN0R) - improves the KAM, PK232, and PK900 modem command files (tnx to Doug K3DUG) - updates the Logging.htm, BroadbandDecode.htm, ConfiguringMultipleSoundcards.htm, CW.htm, CWSettings.htm, GeneralSettings.htm, index.htm, Macros.htm, Phone.htm, PhoneSettings.htm Prerequisites.htm, PSK.htm, PSKReception.htm, PTTSettings.htm, RTTY.htm, RTTYModemReception.htm, RTTYModemSettings.htm, SoundcardPSKSettings.htm, SoundcardRTTYReception.htm, SoundcardRTTYSettings.htm documentation files A user-defined radio command to be sent to Commander after any QSY directive is sent to Commander can be specified on the new "QSY" panel on the Config window's General tab. Note that you must specify the name of the user-defined sequence -- not its assigned function key, nor a raw CAT command. This function is useful for ensuring that the correct antenna is selected, enabling an auto-tuner, or enabling the radios's clarifier. WinWarbler 4.4.8 is available via http://www.dxlabsuite.com/download.htm 73, Dave, AA6YQ