This release - prevents macros initiated via the F10 key from hanging during execution due to Window's use of the F10 key (tnx to Dave KB3MOW and Laurent F1JKJ) - uses an ISO format date in the Main window's title bar (tnx to Henryk SP3E) - on the Config window's General tab, creates "QSO Info" and "Auto Archiving" panels for options previously grouped the "General" panel - enlarges the soundcard RTTY XY display (tnx to Floyd K8AC and Art K6XT) - doesn't set the Transmit pane's font color to black when changing its font parameters (tnx to Bob K0RC) - doesn't automatically reduce window widths and heights on the secondary monitor, since its size is indeterminate (tnx to Gil W0MN) - allows the user to enter a - or -0 in the PSK Clock Offset textbox (tnx to Jamie W2QO) - captures the antenna bearing and path from DXView (if running) and logs them (in the minilog, but ignored until DXKeeper 6.0) - provides the ability to select the Key and PTT output port when using WinKeyer version 2, updating WinKey PinConfig register when output ports are changed (tnx to Jerry KG6TT and Joe W4TV) - when directed to terminate with CW keying via Winkey enabled and the "WinKey Speed" box not checked, sends a command to WinKey to return speed control the speed potentiometer, and wait 5 seconds for WinKey to process this command before terminating (tnx to Bob K0RC) - correctly interprets the macro at the correct point in time when used with internally generated or WinKey-generated CW; this permits macros such as tu (tnx to Bob AD5VJ and Bob K0RC) - accepts a 15-bit parallel port address in hexadecimal (tnx to Paul VE7BZ) - only provides three-digit zero fill for , , and if the increment tx# setting is enabled (tnx to Graeme G6CSY) - provides a macro command that displays the contents of the QSO Info panel's Call textbox when the previous QSO was logged (tnx to Bob K3MQ) - provide a macro that directs DXKeeper, DXView, and Pathfinder to perform previous QSO, callbook, DXCC database, and QSL route lookups; this allows you to disable automatic lookups for speed, and initiate a lookup when desired as part of a macro.(tnx to Juergen DL8LE) - displays transmit frequencies in the CW and Phone transmit panels - displays the transceiver's transmit and receive frequencies in a new "XCVr Freq" panel (tnx to David A92GE) - provides ALT-M as a keyboard shortcut to the XCVR Freq panel's "RX" textbox - in the General panel on the Config window's General tab, provides a new "split frequency operation" box that * when checked, the "XCVR Freq" panel's RX textbox and TX selector track Commander's receive and transmit frequencies respectively, and WinWarbler displays and logs the correct transmit frequency during split frequency operation (tnx to David A92GE) * when unchecked, the "XCVR Freq" panel's RX textbox and TX selector both track the transceiver's Receive frequency -- as the "QSO Freq" selector did in previous versions of WinWarbler - when switching between soundcard RTTY and external modem RTTY receive panes requires the transceiver frequency to change and the transceiver's split mode is enabled and "split frequency operation" is enabled, re-enables the transceiver's split mode after directing the transceiver to QSY (for Icom transceivers, requires Commander 6.3.0 or later) - with "split frequency operation" enabled and the transceiver in split mode and Commander 6.3.0 or later runnning, the optimal offset function leaves the same VFO selected after its completion as was selected before its initiation (tnx to Jamie W2QO) - sets the transceiver to its primary VFO and resets split when selecting a transceiver TX freq in the "XCVR Freq" panel (tnx to Jamie W2QO) - if Commander is not running, propagates changes to the "XCVR Freq" panel's TX selector to its RX textbox (tnx to Bob K0RC) - updates the PSKReception.htm, RTTYMOdemReception.htm, CW.htm, Phone.htm, SouncardPSKSettings.htm, SoundcardRTTYReception.htm, CWSettings.htm, GeneralSettings.htm, Macros.htm, Logging.htm, BroadbandDecodeConfiguration.jpg, DisplayConfiguration.jpg, GeneralConfiguration.jpg, PoitionVecotrConfiguration.jpg, PSKConfiguration.jpg, RTTYMpdemConfiguration.jpg, SoundardRTTYConfiguration.jpg, PSKOperation.jpg, and RTTYOperation.jpg documentation files A special thanks goes to Bob K0RC, Jamie W2QO, and David A92GE for their detailed testing of this release. Note: if you are using an Icom transceiver, make any changes to Split or VFO selection via Commander's Main window, as changes made via the transceiver's front panel are not made available to Commander and WinWarbler. WinWarbler 4.8.5 is available via the DXLab Launcher or via http://www.dxlabsuite.com/download.htm 73, Dave, AA6YQ