This release

 - disables handshaking in the CW and PTT serial ports (tnx to Bill W6WRT)

 - opens and closes the PTT port on startup to reset modem control signals (tnx to Bill W6WRT)

 - includes EXTFSK.DLL for FSK operation with soundcard RTTY (tnx to Jack N8DX)

 - disables WinKey PTT on termination (tnx to Bill W6WRT and Joe W4TV)

 - ensures that Phone and CW RX and TX frequencies are updated when a spot is activated (tnx to Jamie W2QO)

 - doesn't disable the Stop and Abort buttons when starting CW transmission with Tuning enabled for a WinKey (tnx to Jamie W2QO)

 - won't increase waterfall height if doing so would make Main window height larger than screen height (tnx to Robert, VE7CYB)

 - informs the user if DXKeeper is running and an attempt to perform a callbook lookup or log a QSO fails (tnx to Juergen DL8LE)

 - provides  the option to automatically upload to eQSL.cc when logging a QSO (tnx to Jim K7EG)

 - provides the option to specify default outgoing spot notes (tnx to Rich W3ZJ)

 - correctly implements the Receive and Xmit buttons in the "Mixer adjustments" panel on the Config window's Soundcard tab when running on Windows Vista (tnx to Patrick F6CTE)

 - provides a <loadfullmacrobank> macro command that can load a macro bank from a full pathname (tnx to Laurie VK3AMA)

 - provides a <lastqsoband> macro command (tnx to Laurie VK3AMA)

 - provides a <fileraw: filename> macro command that does not append a newline character if the specified filename is not terminated with one (tnx to Laurie VK3AMA

 - disables split frequency operation and selects VFO A before setting the transceiver to the specified frequency when the user strikes the Enter key in the "Xcvr Freq" panel's TX selector with Commander running  (tnx to Robert, VE7CYB)

 - includes an updated DXCC list that defines Montenegro's DXCC prefix as 4O

 - updates the Configuration.htm, ContestSettings.htm, GeneralSettings.htm, Logging.htm, LogSettings.htm, Macros.htm, PSKReception.htm, and SoundcardRTTYReception online documentation files

WinWarbler 5.1.7 is available via the DXLab Launcher or via http://www.dxlabsuite.com/download.htm

   73,

      Dave, AA6YQ