This release - improves the accuracy of RX and TX frequency displays when the operating mode is PSK (tnx to Dave KB3MOW) - improves frequency selection accuracy when double-clicking an entry in the Broadband Decoder (tnx to Dave KB3MOW) - provides a new entry in the RTTY Receive panel's Profile selector so soundcard RTTY can be run without selecting a Profile, thereby retaining user modifications to decoding settings that were not saved in a Profile (tnx to Dave G4MUL) - expands the number of Profiles from 8 to 16 (tnx to Joe W4TV) - provides a new Profile Editor window that allows the user to store MMTTY's current settings to a designated Profile, and set that Profile's name (tnx to Dave G4MUL and Joe W4TV) - when a Profile is selected, enables or disables the Bandpass and Notch filters as specified in that Profile (tnx to Joe W4TV) - provides illustrative macros for PSK, RTTY, and CW (tnx to Richard KC8RP) - updates the RTTYOperation.jpg, SoundardRTTYReception.htm, and SoundcardRTTYSettings.htm documentation files The new Profile Editor is displayed by clicking the new "RTTY Profiles" button in the upper-right corner of the Config window's RTTY tab, or by double-clicking the word Profile in the Main window's "RTTY Receive" panel. The Profile Editor displays all 16 Profiles; any Profile not yet in use is named (where N is it's Profile #), and does not appear in the Profile selector in the Main window's "RTTY Receive" panel. If you modify MMTTY's demodulator, decoder, or modulator settings and wish to store these in a Profile, 1. pick an available Profile # 2. set that Profile's name as desired 3. click that Profile's Store button This will save the demodulator, decoder, and modulator settings in the specified Profile, update that Profile's name, and select that Profile in the Profile selector on the Main window's "RTTY Receive" panel. If you change a Profile's name so that its first character is a < and then click its Store button, this profile will be renamed and will be removed from the Profile selector in the Main window's "RTTY Receive" panel. Keep in mind that changes you make to MMTTY's demodulator, decoder, and modulator settings are not effective until you close MMTTY's Setup window by clicking its OK button. Clicking a Profile's Store button before you close MMTTY's Setup window will not capture your setting changes in that Profile. The illustrative macros for PSK, RTTY, and CW can be found in WinWarbler's Scripts folder in the files psk sample.txt rtty sample.txt cw sample.txt In first-time installations of WinWarbler, the startup macros for PSK, RTTY, and CW are configured load these macro files. If you already have WinWarbler installed but would like to try these macros, then depress the CTRL key while clicking one of WinWarbler's Macro buttons to open the Macro window, and then 1. set the PSK startup macro to 2. set the RTTY startup macro to 3. set the CW startup macro to WinWarbler 6.6.6 is available via the DXLab Launcher or via 73, Dave, AA6YQ