This release - properly stores the name of a soundcard RTTY profile (tnx to Joe W4TV) - when starting to Transmit with the "Transmit PSK" panel's Split box checked, directs Commander to set the transceiver's transmit VFO to the optimal transmission frequency - when split, the Broadband Decoder follows the same VFO used by the Tuning Display (tnx to Joe W4TV) - when the "Transmit PSK" panel's Split box is unchecked, does not disable the transceiver's Split or Dual (tnx to Joe W4TV) - takes the number of visible panes into account when computing the minimum window height (tnx to Iain N6ML and Rich W3ZJ) - when generating an outgoing spot with "Spot split frequency" enabled, decreases the minimum split displayed in the outgoing spot note to greater than 31 hz if operating in PSK31 mode, greater than 63 hz if operating in PSK63 mode, and greater than 125 hz if operating in PSK125 mode (tnx to Rich W3ZJ) - when generating an outgoing spot with the operating mode set to PSK31, PSK63, or PSK125, and "Spot split frequency" enabled, specifies the split frequency to the hertz in the outgoing spot note - provides a "Tuning Display Frequency Scale" panel on the Configuration window's Display tab that enables control of the font metrics (name, size, bold, italics) used to render frequencies in the Tuning Display's Frequency Scale (tnx to Joe W4TV) - moves the "highlight PSK & RTTY sub-bands" option from the Configuration window's General tab to the Display tab's new "Tuning Display Frequency Scale" panel, and provides the ability to specify the colors to be used to render frequencies within a PSK or RTTY sub-band and frequencies not within a PSK or RTTY sub-band (tnx to Joe W4TV) - updates the BroadbandDecode.htm, Macros.htm, DisplaySettings.jpg, GeneralSettings.htm, Logging.htm, and MMTTYSettings.htm, documentation files WinWarbler 7.5.4 is available via the DXLab Launcher or via 73, Dave, AA6YQ